ControlNet Specifications/Requirements Apply
Maximum nodes 48: (using coax cable length of 250m)
Maximum coax cable length: 1000m (assuming 2 nodes)
Trunk connection: Anywhere on the trunk via ControlNet Tap with 1m drop cable required
Coax cable connection: BNC
Data rate: 5M baud
Propagation delay: 1μs maximum per module
Fiber propagation delay: 5μs/km; 1.5μs/1000ft
Power indicator: Green LED with power applied; Solid red LED when voltage <15VDC or >30VDC
Com indicator: Green LED for normal condition
Flashing red/green LED for data errors
Solid red LED for jabber condition

Environmental & Safety

DIN rail mounting: Power input; 15-30VDC, Dual Power Inputs
Input power maximum: 8 Watts
Transient Spike Protection: 1500W 25°C (10 X 1000μs)
Ambient temperature range: 0 to +60 °C
Storage temperature range: -40 to +85 °C
Humidity (non-condensing): 5 to 95% RH
Electrical Safety: CSA C22.2 No. 142 (1987), IEC 60950
EMC immunity: IEC61326-1:1998
Hazardous locations: Designed for Class I, Division 2, Groups A, B, C, & D
(certification pending)
Packaging (polyamide): UL 94V-0

Optical Interface

Optical Wavelength: 1310nm
Communications Data Range: Up to 155 Mbps
Optical Port Connection: Duplex LC connector (other connector options available, see accessories)
Optical Transmit Indicator: Solid green LED for normal condition, Off when no transmit
Optical Receive Indicator: Solid green for normal condition
Solid red for no data receive
Flashing red/green for data errors
Link Interface (2C32 only): Green LED when connected
Red LED when cable disconnected
Red/green flashing LED for data errors

Model	Fiber Type	Fiber Connector	Max Optical Dynamic Range, Fiber Size	Typical Max Distance (mi/km)
2C31-LC-MM/MM	Multi-mode	LC	11 dB into 62.5/125μm fiber 7.5 dB into 50/125μm fiber	2.5mi/4km 1.9mi/3km
2C31-LC-SM/SM	Single mode	LC	19 dB into 9/125μm fiber	12.4mi/20km
2C32-LC-MM/MM	Multi-mode	LC	11 dB into 62.5/125μm fiber 7.5 dB into 50.5/125μm fiber	2.5mi/4km 1.9mi/3km
2C32-LC-SM/SM	Single mode	LC	19 dB into 9/125μm fiber	12.4mi/20km