Lynx Switch - L400/1400 Series

Fully Managed Industrial Ethernet Switch

The L400/1400 Lynx Switch supports full management with single rings (FRNT v0) including fast network redundancy technology. The L400/1400 fulfills the toughest industrial environmental requirements. High MTBF numbers makes the switch the choice for applications where temperature, vibration and insulation are critical parameters. The Lynx switches are approved for industrial, marine, railway, substation automation and defense use. The Fast Re-configuration of Networks Topology (FRNT) concept of Ultra Electronics, NSPI offers ultra fast re-configuration of the network topology.

The FRNT concept eliminates failures caused by network links and/or switches. A redundant ring topology is an excellent choice when high availability and fast re-configuring of the network topology are required. FRNT recovery time is as fast as 20ms. The IGMP snooping feature of the L400/1400 switch handles high-multicast loads. Management of the L400/1400 switches is easy and is done by the user in the Windows based IP Configuration tool from Ultra Electronics, NSPI or SNMP. The IP configuration tool is free and any of the Ethernet ports can be used for this purpose. Thus, no serial port is required for setting the configuration parameter on the L400/1400 switch.

This means that the L400/1400 can be mounted and installed prior to configuration. Excellent real time properties are offered through both layer 2 and layer 3 priority support with four priority queues and the switch is incorporated with a fault contact in order to indicate any switch failures including user configurable port alarms.

Features:

IP Configuration tool for configuration

• Port setting (auto-negotiation, HDX/FDX and 10/100 Mbps)
• Port alarm configuration

Real time Ethernet

• QoS based on layer 2 (IEEE802.1p) and layer 3 (IP ToS)
• Four priority queues
• Strict priority scheduling
• Head of Line blocking prevention for low priority packets

True industrial specification

• Full metal housing, IP40
• Wide temperature range (-40 to +70°C)
• Wide DC power range (19 to 60VDC)
• No moving parts or electrolytic capacitors
• Low power consumption (Typical 5W for no fiber version, 5.7W for one fiber transceiver and 6.4W for two fiber transceivers)
• Redundant power input with polarity protection
• Input Power Monitoring
• High MTBF numbers
• CE approved for industrial use
• DNV approved for marine use (optional)

Auto MDX/MDIX technology to ease switch connection

User configurable fault contact

35 mm DIN rail mounting


Ordering Information:

Lynx 400 Models (10/100Mbps)

Lynx 1400 Models (GbE)